| View previous topic :: View next topic |
| Author |
Message |
jdman
Joined: 13 May 2001
Posts: 302
Location: Midwest
|
 Posted: Sat Mar 23, 2002 2:23 pm Post subject: |
 |
|
| I went through all the posts, and did not see this lens referenced. Would a 4x5 Speed have enough bellows for a flange mounted 360mm Tele-Xenar lens. Russ |
|
| Back to top |
|
 |
RichS
Joined: 18 Oct 2001
Posts: 1468
Location: South of Rochester, NY
|
| Posted: Sat Mar 23, 2002 4:49 pm Post subject: |
|
|
I have a 360 Tele-Xenar in a compound shutter mounted in a Speed lens board that works just fine with my Speed & Crown. It does go just about to the end of the rails, but will focus down to about 15 feet if I remember. Maybe 12 feet or so? Mine is a Linhof f5.5. I have the flange on the inside of the lens board which wouldn't make much of a difference... Nice lens...
|
|
| Back to top |
|
|
JoePhoto
Joined: 13 Oct 2001
Posts: 75
Location: New England
|
| Posted: Thu Jun 13, 2002 2:19 pm Post subject: |
|
|
I've used a Tele Xenar with my Speed Graphic and I drop the bed, pull off the bellows and re-attach them to the front of the rails. This gives me enough draw to get some nice results with that lens but it's still not enough for my Plaubel Tele Peconar (? focal length).
_________________
If the best can't be had let the worst continue.... |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
