| View previous topic :: View next topic |
| Author |
Message |
aconbere
Joined: 19 Oct 2024
Posts: 5
|
 Posted: Sun Oct 20, 2024 12:25 am Post subject: Help replacing graflok back springs |
 |
|
TLDR; I removed the big springs in the ground glass holder of a graflok back and I’m not sure how to get them back in.
I might have made a mistake. I recently happened into a speed graphic in very poor condition and I’ve been working through bits and pieces of it and getting them working. Today I was tackling the graflok back which was heavily corroded and wouldn’t move well enough to insert at film holder.
So I stripped everything down and cleaned all the parts and set about reassembling.
Well I just went to reinstall the levers that connect to the large springs in the ground glass holder and I have no idea how to get them back in. If anyone has any advice or ideas please let me know!
- Anders |
|
| Back to top |
|
 |
aconbere
Joined: 19 Oct 2024
Posts: 5
|
| Posted: Sun Oct 20, 2024 12:35 am Post subject: |
|
|
oh duh, it’s in the service manual
https://imgur.com/a/UrCIRgK
Time to build a tool! Still open to advice  |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
