View previous topic :: View next topic |
Author |
Message |
kidseedreams
Joined: 08 Oct 2018 Posts: 7 Location: Botkins, Ohio
|
Posted: Thu Oct 11, 2018 10:19 pm Post subject: Crown Graphic DIY project Body shutter cable. |
|
|
I wanted to try to finish my Crown Graphic by replacing the body shutter cable that feeds behind the bellows and onto the shutter assemble. I had a replacement cable so I thought I would make everything work properly. I do not use this shutter when using the camera but a direct cable into the lens pocket.
Okay, it looks like it should be easy but it may be hard to get to the screws to removed and replace the cable. Do I need to removed something, "Lens board", bellows or whatever to get a direct shot at the screws? Do I simply place the connecting ring over the pin and screw it into place? I know this is a silly question, but I'm not that familiar with working on the Crown.
I thought I would find instructions online or perhaps a YouTube video but so far I'm coming up empty.
I appreciate all help and yes I know this shutter is probably not needed or often used.
Thanks |
|
Back to top |
|
|
45PSS
Joined: 28 Sep 2001 Posts: 4081 Location: Mid Peninsula, Ca.
|
|
Back to top |
|
|
kidseedreams
Joined: 08 Oct 2018 Posts: 7 Location: Botkins, Ohio
|
Posted: Thu Oct 11, 2018 11:04 pm Post subject: |
|
|
Thanks.
This I understand, "total PITA"
Glad I asked the question before just digging in. I think I'll spend the time shooting and leave well enough alone.
Best,
Patrick |
|
Back to top |
|
|
45PSS
Joined: 28 Sep 2001 Posts: 4081 Location: Mid Peninsula, Ca.
|
Posted: Thu Oct 11, 2018 11:39 pm Post subject: |
|
|
Good project for when it rains for several days. _________________ The best camera ever made is the one that YOU enjoy using and produces the image quality that satifies YOU. |
|
Back to top |
|
|
|