Graflex.org

supermouse1 · Joined: 18 Mar 2002 Posts: 15 Location: lake tahoe, calif.

I have just purchased a Wollensak 90mm (3.5") f6.8 lens to use on my super speed graphic. I am looking for a lens board and have heard that I can use a Crown Graphic board or the Super Speed. Is this true, and what are the dementions for these boards? Also it looks as though I will need a push on filter holder, lens shade to fit this lens. Is there a certain size that I need to fit my series six filters?

Les · Joined: 09 May 2001 Posts: 2682 Location: Detroit, MI

you'll need a 1 1/4" press on series VI adapter.

Any of the 4x5 pacemaker boards that have raised bumps on all sides will work. Midwest Camera Exchange sells very nice repros. http://www.mpex.com

45PSS · Posted: Wed Jun 05, 2002 3:14 am Post subject:

The size, as measured with a veneer caliper, 3 45/64 or 94mm X 3 81/128 or 92.3mm.

_________________
While a picture may be worth a thousand words, a quality photograph is worth a million.

[ This Message was edited by: 45PSS on 2002-06-04 20:16 ]