View previous topic :: View next topic |
Author |
Message |
Arthurwg
Joined: 18 Jun 2002 Posts: 20 Location: NYC
|
Posted: Fri Feb 03, 2006 12:35 pm Post subject: |
|
|
I understand that a Polaroid holder can be fitted to the Series C Graflex. Anyone know which holder can be used, and what mods are necessary? Thanks. Arthur |
|
Back to top |
|
|
Les
Joined: 09 May 2001 Posts: 2682 Location: Detroit, MI
|
Posted: Wed Feb 08, 2006 3:09 am Post subject: |
|
|
The base holder is the 405 holder. This comes with a metal plate on it that fits 4x5 cameras. Take that off and make up a 3x4 version with the proper slots for the light trap and it might work.
I was able to permanently modify a Graflex back from a 3x4 Anny Speed by removing the metal rail at the bottom and opening up the back slightly. Then the Polaroid back would fit the Graflex back directly without a flange. I still had to adjust infinity focus on the RF which I admit is easier to do on a Speed than shimming the ground glass on a Super D |
|
Back to top |
|
|
|