View previous topic :: View next topic |
Author |
Message |
CO840
Joined: 23 Aug 2001 Posts: 1 Location: Denver, CO
|
Posted: Thu Aug 23, 2001 10:52 pm Post subject: |
|
|
I currently have a camera with a plate that reads "Compact Graflex" However it is not an SLR and the body size doesn't match McKeown's picture of one. SN of 48245. It has a top mounted cross hair type viewfinder and a non-Graflex type handle that a previous owner attached. The FP Shutter mechanism, on the outside looks right, but that is about all. Any help in identifying it will be most gratefully accepted. A picture is available at: http://www.pipeline.com/~mswj/CompactGraflex1.jpg
|
|
Back to top |
|
|
Les
Joined: 09 May 2001 Posts: 2682 Location: Detroit, MI
|
Posted: Fri Aug 24, 2001 3:26 am Post subject: |
|
|
Well first off, I'm jealous! Yes that is an odd duck, and I have to say this is one of a handfull of cameras from Graflex that should have the title of 'rare'.
I haven't seen one before, my records show that F&S Division noted it as a Compact camera, rather than a Compact Graflex.There are three entries with this name, all the same size-- 3.25 x 5.5. Later I find an entry listed as a 5x7 Compact Graflex camera. I don't know if there is relevance there or just a bookeeper's shorthand.
The total of the three entries is 1003 cameras. But how many of these are normal and how many were modified is anybody's guess
It looks like the body of a Compact Graflex that has been modified. The rotating back lock release is missing but the mirror linkage is still there, the back is different too, and the body is obviously shallower, and maybe shorter.
I can't tell from here but it looks like a spring back, but might be a graflex back with a focus screen. the latter would make more sense, as it could accomodate a Graflex roll back.
It's just a guess, but from these records, they hadn't made the 3x5 Speed yet. Maybe this was the first attempt at making a small lightweight camera for the Postcard size roll film back.
|
|
Back to top |
|
|
bertsaunders
Joined: 20 May 2001 Posts: 577 Location: Bakersfield California
|
Posted: Sat Aug 25, 2001 5:42 pm Post subject: |
|
|
About 1985 I restored 3 cameras for a local
collector! One was a 3 1/4 x 5 1/2 top handle speed, with a body like this one--the trip lever location seemed odd at the time, as the other cameras of this age that I had seen, were tripped on the opposite side!
In thinking about this particular camera, and with the knowledge that Graflex waisted
nothing over the years (often switched bodies
from one model to another-even obsolete bodies were used this way)It would have been an easy task on the stovepipe body, to modify
it to the top handle as this one is! As an example,the "B" and "D" model bodies differ
only in that the "D" has a 2 piece front, and the "B" is 1 piece, with diff front doors and hardware of coarse!! Wish now that I had recorded all the ser. no's of all the
cameras that I restored and repaired for others--didnt even record "the who and when"
The top handle like this was made from 1912 to 1925 according to Paine! The lopped corner
tension plate was replaced in about 1921.
The curtain plate could have been from the Auto Graflex or the Press models! The one I repaired had a std spring back on it, and it was the first "Postcard" sized camera of this type that I had ever seen!
Bert
[ This Message was edited by: bertsaunders on 2001-08-25 10:44 ] |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|