View previous topic :: View next topic |
Author |
Message |
Ryan605
Joined: 10 Jan 2023 Posts: 1 Location: USA
|
Posted: Tue Jan 10, 2023 7:28 am Post subject: Graflite Jr. Flash problem |
|
|
I have a graflite jr hooked up to the solenoid on my crown graphic, and as soon as I insert the flash bulb, it goes off. I’ve tried having the bulb in first then connecting the flash, having the flash hooked up then placing the bulb, but no matter how I do it, the bulb goes off as soon as it makes contact with the flashgun. Any help would be greatly appreciated. I’ve never used the flash before and might just be making a simple mistake. |
|
Back to top |
|
|
hsandler
Joined: 27 Apr 2016 Posts: 35 Location: Ottawa, Canada
|
Posted: Tue Jan 17, 2023 1:34 am Post subject: |
|
|
I may be wrong, but I believe the Graflite Jr. was not designed to be used with a solenoid; it was designed to be tripped by the sync port of a shutter. Is there a button on it for setting off a flash? If not, then it's being set off by the fact that the solenoid allows the current to flow, same as a shutter when its tripped. Try hooking it up to a PC port on another camera and see if it works properly. |
|
Back to top |
|
|
Henry
Joined: 09 May 2001 Posts: 1642 Location: Allentown, Pennsylvania
|
Posted: Tue Jan 17, 2023 5:03 pm Post subject: |
|
|
What hsandler said. I have a Graflite Jr. and there's no button on mine. It's a shame to waste those now rare flashbulbs; use a bayonet-base automotive bulb instead for testing. It'll wink at you when there's connectivity. |
|
Back to top |
|
|
|