Graflex.org Forum Index Graflex.org
Get help with your Graflex questions here
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Ilex #1 Electronic Shutter

 
Post new topic   Reply to topic    Graflex.org Forum Index -> Lenses Help
View previous topic :: View next topic  
Author Message
ChrisL



Joined: 14 Oct 2006
Posts: 6

PostPosted: Sat Oct 14, 2006 6:38 pm    Post subject: Reply with quote

I just got a nifty Ilex Wide Field Paragon 65/8 for super cheap on a well-known (infamous?) auction site. It's a beautiful lens and it seems to foucs to infinity on my 3x4 speed! It was cheap because it came in a funky Ilex #1 electronic shutter. I made up a new lensboard and for now I'm using my focal plane shutter. (I'll post about the results when I develop the film.)

I was thinkin' I might like to use this on my century so either I have to build a shutter control box or find a mechanical Ilex #1 shutter. This puppy covers 4x5 with no movements so I might get a Graphic View. Anybody ever seen an Ilex #1 shutter?

I think I can build a shutter control box out of a 555 timer chip but I use my graphics to get away from batteries...
Back to top
View user's profile Send private message Send e-mail
Dan Fromm



Joined: 14 May 2001
Posts: 2146
Location: New Jersey

PostPosted: Sat Oct 14, 2006 8:19 pm    Post subject: Reply with quote

Quote:

On 2006-10-14 11:38, ChrisL wrote:
I just got a nifty Ilex Wide Field Paragon 65/8 for super cheap on a well-known (infamous?) auction site. It's a beautiful lens and it seems to foucs to infinity on my 3x4 speed! It was cheap because it came in a funky Ilex #1 electronic shutter. I made up a new lensboard and for now I'm using my focal plane shutter. (I'll post about the results when I develop the film.)

I was thinkin' I might like to use this on my century so either I have to build a shutter control box or find a mechanical Ilex #1 shutter. This puppy covers 4x5 with no movements so I might get a Graphic View. Anybody ever seen an Ilex #1 shutter?

I think I can build a shutter control box out of a 555 timer chip but I use my graphics to get away from batteries...
Measure. And pray.

I once bought what turned out to be an Ilex 65/8 in an electronic shutter not engraved Ilex and it turned out to an almost direct fit in a #00 Compur. The Compur needed to be machined a little to get the right cell spacing. Remember that Ilex shutter sizes don't correspond to Compur/Prontor/Copal.

Good luck, have fun,

Dan
Back to top
View user's profile Send private message
ChrisL



Joined: 14 Oct 2006
Posts: 6

PostPosted: Sat Oct 14, 2006 8:29 pm    Post subject: Reply with quote

[/quote] Remember that Ilex shutter sizes don't correspond to Compur/Prontor/Copal.[/quote]

Yep. These elements almost fit nicely in an old supermatic I had with a bad 127 Ektar. But the thread wasn't quite right and the shutter blades looked TOO close to the rear inner element. So my search for an Ilex #1 mechanical shutter has begun. I've been told to look for an older Searchie(?) fingerprint camera!

Funny name for a fingerprint camera, but it's for real! Folks are still around, google 'em...
Back to top
View user's profile Send private message Send e-mail
Dan Fromm



Joined: 14 May 2001
Posts: 2146
Location: New Jersey

PostPosted: Sat Oct 14, 2006 10:55 pm    Post subject: Reply with quote

Quote:

On 2006-10-14 13:29, ChrisL wrote:
Remember that Ilex shutter sizes don't correspond to Compur/Prontor/Copal.[/quote]

Yep. These elements almost fit nicely in an old supermatic I had with a bad 127 Ektar. But the thread wasn't quite right and the shutter blades looked TOO close to the rear inner element. So my search for an Ilex #1 mechanical shutter has begun. I've been told to look for an older Searchie(?) fingerprint camera!

Funny name for a fingerprint camera, but it's for real! Folks are still around, google 'em...
[/quote]Sirchie. They turn up from time to time on eBay, often with Wollensak lenses in Rapax. Good luck.
Back to top
View user's profile Send private message
Dan Fromm



Joined: 14 May 2001
Posts: 2146
Location: New Jersey

PostPosted: Sat Oct 14, 2006 11:48 pm    Post subject: Reply with quote

Quote:

On 2006-10-14 13:29, ChrisL wrote:
Remember that Ilex shutter sizes don't correspond to Compur/Prontor/Copal.[/quote]

Yep. These elements almost fit nicely in an old supermatic I had with a bad 127 Ektar. But the thread wasn't quite right and the shutter blades looked TOO close to the rear inner element. So my search for an Ilex #1 mechanical shutter has begun. I've been told to look for an older Searchie(?) fingerprint camera!

Funny name for a fingerprint camera, but it's for real! Folks are still around, google 'em...
[/quote]Look here: http://cgi.ebay.com/Sirchie-Labs-Old-Antique-Mug-Shot-Camera-4-x-5_W0QQitemZ190041066384QQihZ009QQcategoryZ15247QQrdZ1QQcmdZViewItem

Stumbled across it while looking for something else.
Back to top
View user's profile Send private message
ChrisL



Joined: 14 Oct 2006
Posts: 6

PostPosted: Sun Oct 15, 2006 3:05 am    Post subject: Reply with quote

Thanks, Dan. Maybe I'll take a shot at it!
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    Graflex.org Forum Index -> Lenses Help All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group