Graflex.org

RJL · Joined: 13 Dec 2004 Posts: 10 Location: Redwood City CA

Hi,

I just recently bought a early series D on Flea-bay in good orig shape.

Everything other than the mirror cleaned up well. The mirror looks like it was cleaned with comet in the past and is somewhat scratched.

Since I got the camera with the intent of using it, what do you guys do to fix old mirrors?

Thanks, any help would be greatly appreciated.

Robin

glennfromwy · Joined: 29 Nov 2001 Posts: 903 Location: S.W. Wyoming

First, determine if the mirror is first (front) or second (rear) suface coated. I'm not familiar with these. If it's second surface, any mirror of the proper thickness will work as a replacement. If it's first surface it's a bit more difficult. I believe first surface mirrors can be obtained from Edmund Scientific. Do not attempt to replace one with the other as it won't focus properly.

_________________
Glenn

"Wyoming - Where everybody is somebody else's weirdo"

bertsaunders · Posted: Wed Dec 15, 2004 12:56 am Post subject:

RJL,
Look in the phone book for a glass shop that re-mirrors std mirrors! I had one re-mirrored for $10 locally, but it took over six months as they had to have enough work to pay for the chemicals and still make a profit! As for front or rear mirroring, out of focus can be corrected by adjusting the GG to compensate for the thickness of the Mirror.....re-mirror the backside (second surface)cleaning will not scratch the mirroring off then! ..........Bert

RJL · Joined: 13 Dec 2004 Posts: 10 Location: Redwood City CA

Thanks guys!!

My camera has a front surface mirror, so I will look into having it redone locally.

Does anyone know of a good source for a service manual for the D-series graflex?

Cheers
Robin